English - عربي

 

 










 

 

 

 
Hydraulic Press Brake

     (Click the photo to see it larger)

 

Technical Data

Bending Force Motor Output Inside Length Working Width Standard Stroke Throat Gap Height Width Table Height Table Width Approx. Weight
(Ton) (HP) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
60 5.5 2050 2600 140 230 2150 1120 850 140 3700
90 7.5 2050 2600 160 240 2250 1235 880 170 4600
120 10 2050 2600 180 250 2330 1300 880 200 5700
150 11 2050  2600 200 250 2400 1310 900 240 6400
180 15 2050 26000 220 270 2480 1325 900 280 7500
120 11 2550 3100 180 250 2360 1300 880 170 6200
150 11 2550  3100 200 250  2380  1310 800 200 7200
180 15 2550 3100 220 270 2480 1325 900 220 7900
220 22 2550 3100 240 280 2700 1685 900 280 10100

* Design and specifications are subject to change without notice.

TOP

 
Guillotine Shear Plate Machine Hydraulic & Mechanical

          (Click the photo to see it larger)

 

Technical Data

Models Length of Cut Thickness Accuracy Stroke Horse Power Weight
(mm) (mm) (mm) (mm) (HP) (kg)
MD 125 G 125 G 3 0.5 100 4 2000
MD 203 G 2005 3 0.5 120 7.5 3000
MD 206 H 2005 6 0.5 150 10 3500
MD 208 H 2005 8 0.5 150 10 4200
MD 306 H 3200 8 0.5 070 10 7000

* Design and specifications are subject to change without notice.

TOP

 
Rolling Machine Hydraulic, Mechanical & Manual

          (Click the photo to see it larger)

 

Technical Data

Thickness X Width Horse Power Lower Parts Upper Part Weight
3 X 1000 Manual 80 80 250
5 X 1000  3 90 90 450
 8 X 1000 5.5 120 120 950
5 X 2000 5.5 150 160 1500
8 X 2000 7.5 180 170 2140
10 X 2000 10 190 200 2690
10 X 3000 12 230 210 5730
12 X 3000 12 + 5.5 250 270 Hydraulic 7800

* Design and specifications are subject to change without notice.

TOP

 

     (Click the photo to see it larger)

 

The exceptionally strong construction of this machine permits its use for all folding purposes.
The upper cheek is adjusted with the help of a hand wheel. The opening range is big enough to permit the pushing through of plates with high beads.
The lower cheek and the bending cheek are adjusted is downward direction in order to permit the bending of radius rails.
The adjustment of the bending cheek is checked by means of graduated scales at both sides.
The bending of equal folding angels is possible with the help of an angle end stop, adjustable with the help of graduated scale.
All spindles are supported in ball bearings; they permit quick and easy operation.
The weight of the bending cheek is outbalanced by a counterweight.
On request a finger end-stop can be supplied.

 

Technical Data

Size I II III IV
 Max. width of plates (mm) 1040 1540 2540 2040
 Max. thickness of plates (mm) 4 3 2 2
 Stroke of the upper cheek (mm) 250 250 250 250
 Adjustment range of bending cheek (mm) 80 80 80 80
 Weight approx. (kg) 1200 1480 1600 1900
 Shipping dimensions (cm) 212x160x70 262x160x70 270x160x70 313x160x70

* Measurements, weights and construction are subject to changes.

TOP

 
Hydraulic Deep Drawing & Mechanical Press

     (Click the photo to see it larger)

Technical Data

 

  From 25 Tons to 500 Tons.

  Pressing - shaping - drawing.

  Deep Drawing.

  Different sizes and capabilities.

 

 

* Design and specifications are subject to change without notice.

TOP

 

 

Home - Plate Forming Machiens - Medical Equipments Contact us

Design By Mh.com.eg